광고

겨울철 보일러 ‘덜 쓰고 따뜻하게’ 난방비 절약하는 방법

최애리 기자 | 기사입력 2026/01/30 [10:29]

▲ 1일 서울시내 주택가에 가스계량기가 설치되어 있다. 오늘부터 민수용(주택·일반용) 도시가스 요금이 6.8% 인상된다. 주택용 도시가스 도매 요금은 서울시 소매 요금 기준으로 MJ(메가줄)당 현재 20.8854원에서 22.2954원으로 1.41원 오른다. 서울의 4인 가구 기준으로 가스비가 월 3770원 증가할 것으로 예상된다. 음식점과 목욕탕 등에서 쓰이는 일반용(영업용) 도매 요금은 MJ당 1.30원 올라간다. 2024.08.01.  © 뉴시스

 

브레이크뉴스 최애리 기자= 겨울철 난방비 부담이 커지면서 도시가스 보일러를 보다 효율적으로 사용하는 방법에 대한 관심이 높아지고 있다. 무작정 보일러를 끄고 추위를 견디는 방식이 아니라, 같은 난방 효과를 유지하면서 가스 사용량을 줄이는 것이 핵심이다.

 

보일러 설정 방식, 온돌모드와 실온모드의 차이

 

우선 보일러 설정 방식부터 점검할 필요가 있다. 전문가들은 물 온도를 기준으로 작동하는 '온돌 모드' 방식과 실내 온도를 기준으로 제어하는 ‘실온 모드’ 사용을 각 가정의 상황에 맞춰 사용하라고 조언한다.

 

온돌모드는 보일러가 난방수(바닥을 도는 물)의 온도를 기준으로 작동한다. 사용자가 50도, 60도처럼 난방수 온도를 설정하면, 보일러는 물 온도가 그 수치에 도달할 때까지 가동되는 식이다.

 

실온 모드의 경우에는 보일러에 연결된 온도 센서가 실내 공기 온도를 직접 감지해 작동한다. 예를 들어 실내온도가 24도가 될 때까지 보일러를 가동하는 식이다.

 

전문가들은 온돌모드의 경우에는 웃풍이 있거나 단열이 취약한 집에서 사용하길 권했다. 단열이 매우 약한 오래된 주택처럼 열 손실이 큰 구조에서 실온모드로 설정하면, 잦은 온·오프를 반복하거나 필요 이상으로 난방을 가동해 오히려 가스비가 더 나올 수 있다는 것. 따라서 이런 경우엔 낮은 온도의 온돌모드로 장시간 유지하는 방식이 더 안정적이라고 조언했다.

 

이외에 대부분의 집에선 '실온 모드'가 효과적이다. 설정 온도에 도달하면 보일러가 멈추고, 일정 수준 이하로 떨어질 때만 다시 가동되기 때문에 실제로 사람이 느끼는 추위와 더 직접적으로 연동된 방식이다.

 

▲ 11일 오후 서울 중구 서울역 광장 앞에서 진보당 주최로 열린 '난방비 폭탄 윤석열 정권 규탄 대회' 참가자들이 구호를 외치고 있다. 2023.02.11.  © 뉴시스


실내온도 20~21도 유지가 핵심

 

또한 실내 온도를 20~21도 수준으로 약간 낮게 설정해두고 유지하는 것이 과도한 고온 난방을 반복하는 것보다 가스 소모를 줄이는 데 도움이 된다. 외출이나 취침 시에도 아예 꺼두는 것보단 17~18도로 낮춰두는 것만으로도 난방비 절감 효과가 크다.

 

보일러가 자주 껐다 켜지면 가스비 늘어나

 

보일러를 자주 껐다 켜는 습관도 가스비 상승의 원인으로 꼽힌다. 난방을 다시 시작할 때 예열 과정에서 가장 많은 가스가 소모되기 때문이다. 따라서 짧은 시간 강하게 틀기보다는 낮은 온도로 꾸준히 유지하는 방식이 더 경제적이다. 특히 아파트의 경우 인접 세대의 난방 열이 일부 전달되는 구조이기 때문에 이러한 방식의 효과가 더욱 크다.

 

온수 온도 설정만 바꿔도 절약 효과

 

온수 사용 설정도 점검 대상이다. 온수 가열 역시 상당한 가스를 소비하는 만큼, 온수 설정 온도를 낮추는 것만으로도 월 난방비에 차이가 발생할 수 있다. 겨울철엔 샤워용 온수 온도를 50~60도까지 높게 설정해두는 경우가 많지만, 실제 생활에서는 40~45도면 충분하다. 또한 수도 레버를 온수 방향으로 잠깐이라도 틀기만 해도 보일러는 가열 과정을 거치며 가스를 소모하기 때문에 잠깐의 물 사용을 한다면, 수도 레버를 완전히 냉수방향으로 틀어서 쓴다면 보일러가 가동하지 않는다.

 

안 쓰는 방엔 난방수 공급 차단해야

 

난방 밸브 관리 역시 절약의 핵심 요소다. 사용하지 않는 방이나 창고, 작은방의 난방 밸브를 최소화하거나 잠그고, 거실과 침실 위주로 난방을 집중하는 것이 바람직하다. 사람이 거주하지 않는 창고방 등까지 동일하게 온수를 보내면 불필요한 가스 소비로 이어질 수 있다.

 

▲ 안덕근 산업통상자원부 장관이 7일 경기도 고양시 덕양구 삼송1동 4,5통 경로당을 방문해 ‘난방비 지원 대책 이행 실태를 점검’하며 단열 공사와 창호 교체 등 난방비 대책 이행 현황을 살펴보고 있다. (사진=산업통상자원부 제공) 2024.01.07.  © 브레이크뉴스


문풍지와 에어캡으로 열 손실 줄이기

 

이외에 주거 공간의 단열 상태를 개선하는 것도 중요하다. 창문 틈이나 현관문 하단에 문풍지나 에어캡을 부착하는 것만으로도 열 손실을 크게 줄일 수 있다. 특히 베란다가 있는 주택의 경우 베란다 쪽 문을 닫아두는 것만으로도 실내 온도 유지에 도움이 된다.

 

▲ 가스·전기 등 에너지 요금의 상승으로 인해 절약형 난방·보온용품의 수요가 늘고 있다. 2일 오후 서울 시내 한 생활용품점에 보온 필름 등 방한용품이 진열돼 있다. 2023.11.02.  © 뉴시스


체감온도를 올려 보일러 가동을 줄이자

 

체감 온도를 높이는 방법도 병행할 만하다. 바닥에 카펫이나 러그를 깔면 발에서 느껴지는 냉기를 줄인다거나, 활동하기 편한 후리스, 경량패딩을 집에서 입고 있는다면 동일한 실내 온도에서도 더 따뜻하게 느껴진다. 이로 인해 보일러 설정 온도를 1~2도 낮출 수 있는데, 이 차이가 실제 가스비 절감으로 이어진다.

 

실내 습도 관리도 간과해서는 안 된다. 실내 습도를 40~50% 수준으로 유지하면 체감 온도가 1~2도 상승하는 효과가 있다. 보일러 온도를 올리는 것보다 가습기를 적극 사용하는 것이 비용 대비 효율적인 난방 보조 수단으로 평가된다.

 

오래된 보일러는 효율 저하 가능성

 

보일러 자체의 상태 점검도 필요하다. 사용 연수가 2~3년 이상 된 보일러는 열교환기나 필터 상태에 따라 효율이 떨어질 수 있다. 일반적으로 10년 가량 사용한 보일러의 열효율은 새 제품 대비 약 10% 가량 떨어진다고 알려져 있다. 따라서 최근 출시되는 콘덴싱 보일러로 바꾸는 것만으로도 난방 효율이 개선돼 가스 사용량이 줄어드는 사례도 적지 않다.

 

난방비 절약의 핵심은 ‘약하게 오래’

 

마지막으로 전문가들은 겨울철 난방비 절약의 핵심은 ‘강하게 짧게’가 아닌 ‘약하게 오래’, 그리고 ‘열이 새지 않도록 막아야 한다’고 강조하면서 작은 설정 변화와 생활 습관 개선만으로도 난방비 부담을 줄일 수 있다고 전했다.

 

*아래는 위 기사를 '구글 번역'으로 번역한 영문 기사의 [전문]입니다. '구글번역'은 이해도 높이기를 위해 노력하고 있습니다. 영문 번역에 오류가 있을 수 있음을 전제로 합니다.<*The following is [the full text] of the English article translated by 'Google Translate'. 'Google Translate' is working hard to improve understanding. It is assumed that there may be errors in the English translation.>

 

Break News, Choi Ae-ri = As heating costs rise in winter, interest in using city gas boilers more efficiently is growing. Rather than simply turning off the boiler and enduring the cold, the key is to reduce gas usage while maintaining the same heating effect.

 

Boiler Settings: The Difference Between Ondol and Room Temperature Modes

 

First, it's important to examine the boiler settings. Experts advise using "Ondol mode," which operates based on water temperature, and "room temperature mode," which controls based on room temperature, depending on each household's specific needs.

 

In Ondol mode, the boiler operates based on the temperature of the heating water (water circulating under the floor). The user sets the heating water temperature to 50 or 60 degrees Celsius, and the boiler operates until the water temperature reaches that level.

 

In room temperature mode, a temperature sensor connected to the boiler directly detects the indoor air temperature. For example, the boiler operates until the indoor temperature reaches 24 degrees Celsius.

 

Experts recommend using Ondol mode in homes with drafts or poor insulation. In structures with high heat loss, such as older homes with poor insulation, setting the room temperature mode can lead to frequent on/off cycles or excessive heating, which can actually increase gas bills. Therefore, in such cases, it's recommended that maintaining the boiler in the lower-temperature Ondol mode for extended periods of time be more reliable.

 

Furthermore, the "room temperature mode" is effective for most homes. The boiler shuts off when the set temperature is reached and restarts only when the temperature drops below a certain level, making it more directly linked to the perceived cold.

 

Maintaining a Room Temperature of 20-21°C is Key

 

Also, setting and maintaining a slightly lower room temperature, around 20-21°C, helps reduce gas consumption rather than repeatedly heating at excessively high temperatures. Even lowering the temperature to 17-18°C when going out or going to bed, rather than turning it off completely, can significantly reduce heating costs.

 

Frequent Boiler Turns on and Off Increases Gas Bills

 

Frequently turning the boiler on and off is also cited as a contributing factor to higher gas bills. This is because the most gas is consumed during the preheating process when restarting the heating system. Therefore, maintaining a low, steady temperature is more economical than briefly turning the water on high. This is especially true in apartments, where some of the heating energy is transferred from neighboring units.

 

Simply Changing the Hot Water Temperature Setting Can Save You Money

 

The hot water setting should also be reviewed. Since hot water heating consumes significant gas, simply lowering the temperature can significantly impact your monthly heating bill. While shower temperatures are often set as high as 50-60 degrees Celsius in winter, 40-45 degrees Celsius is sufficient in real life. Furthermore, even briefly turning the faucet to the hot water position causes the boiler to consume gas during the heating process. Therefore, if you only use water for a short period of time, or if you turn the faucet completely to the cold water position, the boiler will not operate.

 

Turn off the heating water supply to unused rooms.

 

Heating valve management is also a key factor in saving money. Minimize or close the heating valves in unused rooms, storage rooms, and small rooms, and focus your heating efforts primarily on the living room and bedrooms. Sending the same amount of hot water to unoccupied storage rooms and other areas can lead to unnecessary gas consumption.

 

Reducing Heat Loss with Weather Stripping and Bubble Wrap

 

Improving the insulation of your living space is also important. Simply attaching weather stripping or bubble wrap to the cracks in windows or under the front door can significantly reduce heat loss. For homes with balconies, simply keeping the balcony door closed can help maintain indoor temperatures.

 

Reduce boiler operation by raising the perceived temperature

 

It's also worth considering ways to increase perceived temperature. For example, laying down carpets or rugs on the floor can reduce the chill felt by your feet. Wearing comfortable fleece or lightweight padding at home can make the same indoor temperature feel warmer. This can lower the boiler setting by 1-2 degrees, which translates into actual gas cost savings.

 

Managing indoor humidity is also crucial. Maintaining indoor humidity at 40-50% can increase perceived temperature by 1-2 degrees. Actively using a humidifier is considered a more cost-effective way to supplement heating than simply raising the boiler temperature.

 

Old boilers may experience reduced efficiency.

 

It's also important to inspect the condition of the boiler itself. Boilers older than two to three years may exhibit reduced efficiency depending on the condition of their heat exchangers and filters. Generally, the thermal efficiency of a boiler used for around ten years is known to decrease by about 10% compared to a new one. Therefore, simply switching to a recently released condensing boiler has been shown to improve heating efficiency and reduce gas usage.

 

The Key to Saving on Heating Costs: "Long, Soft Heat"

 

Finally, experts emphasize that the key to saving on heating costs in winter is not "long, soft heat," but rather "long, soft heat" and "preventing heat leakage." They added that even small adjustments to settings and lifestyle habits can reduce heating costs.

기사제보 및 보도자료 119@breaknews.com
ⓒ 한국언론의 세대교체 브레이크뉴스 / 무단전재 및 재배포금지
 
  • 도배방지 이미지

광고
광고
광고